RTHB機組UCP2設定調整記錄 |
OPERATOR SETTINGS GROUP 操作人員設定組: |
|
| Menu Item 顯示項目 | Choices 選擇范圍 | Default 出廠默認值 | Setting 設定值 |
1 | Front Panel Chilled Wtr Setpt: 操作面板冷凍水設定值 | 0->65 Deg F, -17.8->18.3 Deg C | 44.0 Deg F, 6.7 Deg C. | |
2 | Front Panel Current Limit Setpt: 操作面板電流限制設定值 | 40->100% | 100% | |
3 | Chilled Water Reset Type: (If set to "Return" or "Outdoor Air", please refer to manual for setting procedure) 冷凍水復位類型: (如設定為`回水`或 `室外溫度`,請參閱手冊中設定程序) | Disable, Return, Constant Return, Outdoor Air 無效,回水,固定回水,室外溫度 | Disable 無效 | |
4 | Ice Building: 制冰功能: | Disable, Enable 無效,有效 | Disable 無效 | |
5 | Panel Ice Termination Setpoint: (Displayed if Ice Building Enabled) 操作面板制冰完成設定點 (制冰功能有效時顯示此項目) | 20->32 Deg F, -6.7->0. Deg C | 27 Deg F. -2.8 Deg C. | |
6 | Ice to Normal Cooling Timer (Displayed if Ice Building Enabled) 制冰功能轉換正常制冷間隔時間 (制冰功能有效時顯示此項目) | 0-10 Minutes 0-10 分鐘 | 5 Minutes 5 分鐘 | |
7 | Chilled Water Setpoint Source: 冷凍水設定點來源: | Front Panel, Tracer, Remote Computer, External Source, External Direct Capacity Cnt操作面板,Tracer,遠端 計算機,外部設定源,外部直接容量控制 | Front Panel 操作面板 | |
8 | Current Limit Setpoint Source: 電流限制設定點來源: | Front Panel, Tracer, Remote Computer, External Source 操作面板,Tracer,遠端計算機, 外部設定源, | Front Panel 操作面板 | |
9 | Ice Termination Setpoint Source: (Displayed only if "Ice Building Option" is installed) )制冰完成設 定點來源(制冰功能有效時,顯示) | Front Panel, Tracer, Remote Computer 操作面板,Tracer,遠端計算機, | Front Panel 操作面板 | |
10 | Setpoint Source Override: 設定點優先來源 | None, Use F.P Setpoints, Override Tracer, Use Default Setpoints 無, 操作面板, Tracer優先, 默認設定值 | None 無 | |
SERVICE SETTINGS GROUP BASIC維修基本設定組: |
| Menu Item 顯示項目 | Choices 選擇范圍 | Default 出廠默認值 | Setting 設定值 |
1 | Language : 語言 | English, Francais, Deutsche, Espanol, Nippon, Italiano, Dutch, Chinese 英語,法語,德語,西班牙語,中文,等等 | English,Chinese 英語,中文 | |
2 | Display Units: 顯示單位制 | English, SI英制單位,國際單位 | English英制單位 | |
3 | Decimal Places Displayed: 顯示精度 | XXX.X, XXX | XXX.X | |
4 | Display Menu Headings: 顯示菜單題目 | Enable, Disable 有效,無效 | Enable 有效 | |
5 | Differential To Start Setpoint: 啟動溫差設定 | 1->10 Deg F, .5->5.5 Deg C | 5 Deg F | |
6 | Differential To Stop Setpoint: 停機溫差設定 | 1->10 Deg F, .5->5.5 Deg C | 5 Deg F | |
7 | Evap Pump Off Delay: 冷凍水泵延時停止設定 | 1->30 Minutes 1~30 分鐘 | 1 Minute 1分鐘 | |
8 | Clear Restart Inhibit Timer 再啟動禁止計時器清零操作 | to Clear 按清除 | | |
FIELD STARTUP GROUP現場啟動組:(++--++): |
| Menu Item 顯示項目 | Choices 選擇范圍 | Default 出廠默認值 | Setting 設定值 |
1 | ICS Address: ICS地址 | 0 -> 255 | 65 | |
2 | Power Up Start Delay Time供電后延時啟動設定 | 0-600 Seconds0-600秒 | 0 Seconds0秒 | |
3 | Design Delta Temp Setpoint:冷凍水進/出水設計溫差 | 4 -> 30 Deg F, 2.2 -> 16.7 C | 10 Deg F. 5.5 Deg C | |
4 | Lvg Wtr Temp Cutout Setpoint: (When this setpoint is within 1.7 Deg F of the Front Panel Chilled Water Setpoint, the Front Panel Chilled Water Setpoint is increased along with this setpoint to maintain the differential)低冷凍水出水溫度切斷設定點,(出水溫度設定點應與低水溫切斷點保持1.7F溫差) | -10 -> 36 F, -23.2 -> 2.2 C | 35 Deg F, 1.67 Deg C | |
5 | Low Rfgt Temp Cutout Setpt: (When this setpoint is within 6 Deg F of the Front Panel Chilled Water Setpoint, the Front Panel Chilled Water Setpoint is increased along with this setpoint ot maintain the differential.)低制冷劑飽和溫度切斷設定點,(出水溫度設定點應與低制冷劑溫度切斷點保持6F溫差) | -35 -> 36 F, -37.2 -> 2.2 C | 28 Deg F, -2.2 Deg C | |
6 | Condenser Limit Setpoint:冷凝器壓力過高限制設定點 | 80 -> 120 % | 93 %HPC | |
7 | Maximum RI Timer Setiing: 最大再啟動禁止計時器設定 | 5 -> 20 Minutes 5~20分鐘 | 5 Minutes 5分鐘 | |
8 | Under/Over Voltage Protection: (Permits "Enable" only if Option Installed) 過電壓/低電壓保護功能,(電壓傳感器已安裝時,有效) | Disable, Enable 無效,有效 | Enable 有效 | |
9 | Phase Reversal Protection:反相保護功能 | Disable, Enable無效,有效 | Enable有效 | |
10 | Phase Unbalance Protection:相不平衡保護功能 | Disable, Enable無效,有效 | Enable有效 | |
11 | Momentary Power Loss Protection: 瞬時失電保護功能 | Disable, Enable 無效,有效 | Enable 有效 | |
12 | High Discharge Temp Cutout: 排氣溫度過高切斷設定點 | 170 ->220 F, 76.6 -> 104.4 C | 190 Deg F, 87.8 Deg C | |
13 | Soft Load Control: 軟加載控制功能 | Disable, Enable無效,有效 | Disable無效 | |
14 | Soft Load Starting Current Limit: 軟加載控制啟動電流限制 | 40 -> 100 % | 100 % | |
15 | Soft Load Current Limit Rate: 軟加載控制啟動電流限制速率 | 0.5 -> 5.0 % / Minute 0.5~5.0%/分鐘 | 5.0 % / Minute 5.0%/分鐘 | |
16 | Soft Load Lvg Water Rate: 軟加載控制冷凍水出水溫度速率 | 0.5 -> 5.0 Deg F/Minute 0.3 -> 2.8 Deg C/Minute 0.5~5.0F/分鐘 0.3~2.8C/分鐘 | 2.5 Deg F/Min 1.4 Deg C/Min 2.5F/分鐘1.4C/分鐘 | |
17 | LWT Proportional Gain Setpt: 冷凍水出水溫度比例增益設定 | 0-100% /F (0-180%/C) | ***** | |
18 | LWT Integral Gain Setpt: 冷凍水出水溫度積分增益設定 | 0-1%/F, (0-1.8%/C) | ***** | |
19 | LWT Derivative Gain Setpt: 冷凍水出水溫度微分增益設定 | 0-1000 %/F, (0-1800 %/C) | 0.0 %/F, 0.0 %/C | |
20 | EXV MAXIMUM Travel Setpt: 電子膨脹閥最大行程設定: | 0 -> 20,000 (1 Step/Incr) | ***** | |
21 | EXV Closed Stop: 電子膨脹閥關閉設定點 | 0-100% | ***** | |
22 | EXV Open Stop: 電子膨脹閥打開設定點 | 0-100% | 100% | |
23 | EXV Deadband: 電子膨脹閥控制死區設定點 | 0-100Steps | 20Steps | |
24 | EXV Error Deadband: 電子膨脹閥控誤差死區設定點 | 0-2.00F | 1.00F | |
25 | Disch Supht Proportional Gain: 排氣過熱度比例增益設定 | 0-200 | 4 | |
26 | Disch Supht Integral Gain Setpt: 排氣過熱度積分增益設定 | 0-200 | ***** | |
27 | Disch Supht Derivative Gain Setpt: 排氣過熱度微分增益設定 | 0-150 | ***** | |
28 | Extended Unloading擴展卸載 | Enable, Disable, 有效,無效, | Disable無效 | |
29 | Extended Unload Time 擴展卸載限制時間 | Enable, Disable, 有效,無效, Unlimited Time不限制時間 | Disable 無效 | |
30 | Maximum Extended Unloading Time 擴展卸載的時間 | 1-480 Min | 30 Min | |
31 | Local Atmospheric Pressure: 當?shù)卮髿鈮毫?/span> | 10 -> 15 psia 10~15Psia | 14.7 psia 14.7 Psia | |
MACHINE CONFIGURATION GROUP機組配置組:(+-+-+-): |
| Menu Item 顯示項目 | Choices 選擇范圍 | Default 出廠默認值 | Setting 設定值 |
1 | Unit Frequency: 機組適用頻率 | 60 HZ, 50 HZ | 60 HZ | |
2 | Unit Type: 機組類型 | CVHE,CVHG,RTHB | RTHB | |
3 | Unit Tons: 機組制冷量(冷噸) | 100 ->1800 ( 10 Ton incr) | 500 | |
4 | Refrigerant Type: 使用制冷劑類型 | R11, R123, R12, R134a, Water. R22 | R22;R134a | |
5 | Starter Type: 啟動器類型 | Undefined, Variable Speed, Y-Delta, X-Line, Solid State, Auto Xformer, Primary Reactor不明確,變速啟動,星-三角啟動,直接啟動,固態啟動 自藕變壓器啟動,初級電抗器啟動 | Y-Delta 星-三角啟動 | |
6 | 2nd Level Contactor Integrity Test: (Startup Contactor Test--Y-D Only) 第二級接觸器完整性測試(只適用星-三角啟動) | Disable, Enable 無效,有效 | Disable無效 Enable 有效 (星-三角啟動) | |
7 | Rated Load Amps: 額定運行電流 | 0 -> 2,500 | 300 | |
8 | Motor Heating Constant: 馬達發熱時間 | 0 - 100 Minutes0~100分鐘 | 5 Minutes5分鐘 | |
9 | Current Overload Setting # 1: (See Manual for Setup Procedure) 電流過載設定#1(參見手冊啟動程序) | 00 -> 31 | 00 | |
11 | Current Overload Setting # 2: (255 Minus Timer Setpt #1 above) 電流過載設定#2=255減10項設定值 | 224 -> 255 | 255 | |
12 | Maximum Accel Timer Setpt #1: (See Manual for Recommended Setpt) 啟動最大加速時間設定#1(參見手冊建議值) | 2 -> 64 Seconds | 27 Seconds | |
13 | Maximum Accel Timer Setpt #2: (255 Minus Timer Setpt #1 above) 啟動最大加速時間設定#2=255減12項設定值 | 191 -> 253 Seconds | 228 Seconds | |
14 | (Opt)External Chilled Wtr Setpoint: 外部冷凍水出水溫度設定點輸入 | Installed, Not Installed 已安裝,未安裝 | Not Installed 未安裝 | |
15 | (opt)External Current Limit Setpt: 外部電路限制設定點輸入 | Installed, Not Installed 已安裝,未安裝 | Not Installed 未安裝 | |
16 | Acceleration Time Out Action: 啟動加速超時 (Recommend "Shutdown" Only) (只推薦設定為`停機`) | Shutdown, Transition 停機,轉換 | Shutdown 停機 | |
19 | Motor Winding RTD Type: 馬達線圈溫度傳感器類型 | 75 Ohm/ 75 F,100 Ohm/ 0 C 75歐姆/75F 100歐姆/0C | 75 Ohm / 75 Deg F 75歐姆/75F | |
20 | High Pressure cutout setting: 高壓切斷設定點 | 0 ->500 PSIG (5 PSIG incr) | 270 PSIG | |
21 | Line Voltage Sensing Option: 線電壓傳感器選裝功能 | Installed, Not Installed 已安裝,未安裝 | Not Installed 未安裝 | |
22 | Unit Line Voltage 機組電壓 | 180-6600 Volts,(5V / Incr) 180-6600伏 | 380 Volt 380伏 | |
23 | Ice Building Option: 制冰選裝功能 | Installed, Not Installed 已安裝,未安裝 | Not Installed 未安裝 | |
24 | External Analog Inputs: 外部模擬信號輸入類型 | 4-20 ma, 2-10 vdc | 4-20 ma | |
25 | Tracer Option: Tracer自控選裝功能 | Installed, Not Installed 已安裝,未安裝 | Not Installed 未安裝 | |
26 | TCI Option: TCI 模塊選裝 | Installed, Not Installed 已安裝,未安裝 | Not Installed 未安裝 | |
27 | Printer Option: 打印模塊選裝 | Installed, Not Installed 已安裝,未安裝 | Not Installed 未安裝 | |
SERVICE TEST GROUP維修測試組:(++--++): |
| Menu Item 顯示項目 | Choices 選擇范圍 | Default 出廠默認值 | Setting 設定值 |
1 | Chilled Water Pump: 冷凍水泵控制 | Auto, On 自動,開 | Auto 自動 | |
2 | Chilled Water Flow Switch: 冷凍水流量開關 | FS Open/No Flow, 流量開關斷開/無流動 FS Closed/Flow 流量開關閉合/流動 | | |
3 | Condenser Water Pump: 冷卻水泵控制 | Auto, On 自動,開 | Auto 自動 | |
4 | Condenser Water Flow Switch: 冷卻水流量開關 | FS Open/No Flow, 流量開關斷開/無流動 FS Closed/Flow 流量開關閉合/流動 | | |
5 | Starter Dry Run: (See Manual for Procedures --Y-D only) 干(無電源)運行測試啟動器 (參見手冊中有關程序—只適用星-三角啟動器) | | | |
6 | Expansion Valve Test: 膨脹閥測試 | Enable, Disable, 無效,有效, | Disable 無效 | |
7 | EXV control Status 電子膨脹閥控制狀態 | Auto, Manual 自動,手動 | Auto 自動 | |
8 | Expansion Valve Position: 膨脹閥位置 | XXX.X% Open XXX.X%開 | | |
9 | Discharge Superheat 排氣過熱度 | XXX.X F/C | | |
10 | Slide Valve Control Status: 滑閥控制狀態 | Auto, Hold, Load, Unload 自動,保持,加載,減載 | | |
11 | Limit Condition 限制狀態 | | | |
12 | Manual Load/Unload Duty Cycle 手動加載/減載循環 | 0-50% | 30% | |
